Secure your pipeCOVERS and pipe caps with our new pcTAPE! Learn More

flangeDOTS® +VCI – Self Adhesive Flange Protection

flangeDOTS® are adhesive flange protectors that hold up to the most aggressive blast medias. They also keep unwanted contamination out of all your piping components. flangeDOTS®+VCI can be installed and removed quickly. And there's more!

They have a water-based adhesive that is safe to use on all grades of steel and specialty metals including stainless steel. They are precision cut to fit the raised face surface and give you a clean paint edge. And there is just one more thing, we have added a VCI additive to the adhesive to keep the flange face from rusting.

Beneficial for short-term storage, we believe flangeDOTS® +VCI are the most effective adhesive flange protector on the market today. These self adhesive protectors can be used for long-term preservation but they must be combined with our flangeBUMPERS and multiNUTS to create an air-tight, water-tight seal on the flange face. 

 

Read More

Here are a few benefits to using flangeDOTS® +VCI:

  • 3 in1 Self-adhesive protection
    • Protects against flange damage
    • Provides Flange face corrosion protection
    • Provides cleanliness protection
  • Safe for stainless steel and specialty metals (Low Chloride)
  • VCI additive prevents Flange face corrosion (Secret Sauce)
  • Leaves No Adhesive Behind – No Clean-up required
  • Used during Short-term Preservation
  • Mylar backer wont tear on removal
  • Custom Sizes Available
  • Logo Customization Available for a 5% Price Increase 
  • Available in sizes from ½”-120” in all pressure classes
    • flangeDOTS+VCI 36” and below fit all pressure classes
  • Part of a patented preservation system (Long-Term Storage Option)
    • flangeDOT+VCI/flangeBUMPER/multi-NUTS

 

Before using our flangeDOTS+VCI…Clean, Inspect, Protect

  1. Clean flange face
  2. Inspect flange face using P3-GIT
  3. Apply P3 flangeDOT+VCI

 

 

 

FlangeDOTS, Stick on Flange Protector Flange face protection 2 Flange face protection peel off
ASME / ANSI B16.5 Flange Dimensions
flangeDOTS® +VCI Part NumberNominal Pipe Size in InchesRaised Face Diameter in InchesQuote Request
P3-FD-035-00-2 1/2 1.375 RFQ
P3-FD-035-00-3 3/4 1.688 RFQ
P3-FD-035-01-0 1 2.000 RFQ
P3-FD-035-01-1 1 1/4 2.500 RFQ
P3-FD-035-01-2 1 1/2 2.875 RFQ
P3-FD-035-02-0 2 3.625 RFQ
P3-FD-035-02-2 2 1/2 4.125 RFQ
P3-FD-035-03-0 3 5.000 RFQ
P3-FD-035-03-2 3 1/2 5.500 RFQ
P3-FD-035-04-0 4 6.188 RFQ
P3-FD-035-05-0 5 7.313 RFQ
P3-FD-035-06-0 6 8.500 RFQ
P3-FD-035-08-0 8 10.625 RFQ
P3-FD-035-10-0 10 12.750 RFQ
P3-FD-035-12-0 12 15.000 RFQ
Available Sizes up to 120" NPS
Custom Printing available at additional cost

If you would like more information or would like to receive samples, contact us today!

We look forward to working with you and your team.

 

We help oil & gas related companies
Protect assets while increasing throughput
With innovative preservation products and processes
So, they can build more in less time.


Contact us today for pricing and free samples!

Get A Quote Now

    flangeDOTS® are a flexible self-adhesive Flange Protector designed to protect the gasket surface area of a raised face flange during sand, bead and shot blasting and painting. They also keep the inside of the pipe spools, valves and vessels free of blast and paint debris during the blasting, painting and coating process.

    We have tested flangeDOTS® with wind speed well over 100 MPH and find that our product will stay attached firmly.

    No, flangeDOTS® are designed as a peel and stick product. You just install it to a clean dry surface and it’s ready for blast and paint.

    Yes, flangeDOTS® are designed to be a Peel and Stick Adhesive Flange Protector with a proprietary pressure sensitive adhesive. You just remove the backer, align to the raised surface area of the flange and stick it. This will save countless hours in application time over conventional masking methods using layers and layers of tape and then trimming the tape to the raised surface area of the flange.

    flangeDOTS® peel off with relative ease and leave no glue residue behind. Compared to traditional masking methods like duct tape that leave large amounts of glue and residue behind, costing you additional time and money to clean the flange surface, flangeDOTS® will speed up your process and put more money on your bottom line.

Ask A Quick Question

fields marked with * are required


Our #1 priority is that you become more productive & profitable. Please fill out this form, & our team will get back to you shortly.

We are committed to developing & supplying products that will save you time, save you money & help you produce a better quality product.